Skip to Content

Knowledge

Frequently asked questions about fleet365

Answers to questions about tracking, logbook, duty hours, dispatch, security and data protection, collected from all pages.

Speech bubbles with question mark and tick above a map
Can I install the fleet365 app today?

Wenn Sie zur Testphase eingeladen sind, ja. Die App für iPhone und iPad ist derzeit in der Testphase und noch nicht im App Store. Die Teilnahme an der Testphase fragen Sie über das Kontaktformular an. Ohne Installation nutzbar ist die Fahrer-Web-App im Browser.

Bekomme ich Mitteilungen aufs iPhone?

Ja, in der App für iPhone und iPad, auch auf dem Sperrbildschirm: bei einem neuen Ziel und mit der Frage „Privat oder Firma?“ beim Fahrtantritt. Alarme kommen noch nicht als Mitteilung aufs Telefon, sie stehen in der Alarmliste im Portal.

Kann ich in der App meine Arbeitszeit buchen?

Im Portal im Browser ja, auch am Telefon. In der App für iPhone und iPad ist das Buchen in der Testphase. Den Umfang beschreibt die Seite Arbeitszeiterfassung.

Do I need an app for tracking?

No. Map, logbook, alarms and reports run in the browser. The apps are a supplement for drivers and dispatch.

Is there an Android app?

Sie ist in Entwicklung und derzeit im internen Test, für Telefon, Wear OS, Android TV, Fire TV und Android Auto. Im Play Store ist sie noch nicht, und installieren lässt sie sich heute nicht. Die Ortung selbst und die Fahrer-Web-App laufen im Browser jedes Smartphones.

Läuft die Wandanzeige auf einem Fire TV Stick?

Die App für Android TV und Fire TV ist in Entwicklung und derzeit im internen Test, noch nicht im Amazon Appstore. Bis dahin zeigen Sie die Karte über den öffentlichen Link im Browser, siehe Anzeige auf dem Fernseher.

Bekomme ich Mitteilungen auf ein Android-Telefon?

Noch nicht. Sie sind am Server vorbereitet, aber nicht eingeschaltet. Maßgeblich ist ohnehin die Liste in der App, die Mitteilung ist nur der Anstoß.

Does the Apple TV app work yet?

Sie ist aktuell im Beta-Test und noch nicht im App Store. Der Server-Teil für die Kopplung ist in Betrieb. Wer nicht am Beta-Test teilnimmt, zeigt die Karte über den öffentlichen Link auf dem Fernseher.

Is my position stored in the app all the time?

No. The driver position is reported only when the switch is on and only on business trips. If a trip is reclassified as private, the points are deleted.

Kann ich die Arbeitszeiterfassung für Mitarbeiter heute schon nutzen?

Ja, im Portal. Mitarbeiter buchen Kommen, Gehen und Pause im Browser, die Firma verwaltet Mitarbeiter, Genehmigungen und Dienstplan. Das Buchen in der App für iPhone und iPad ist in der Testphase.

Ist die Arbeitszeiterfassung eine Lohnabrechnung?

Nein. Dies ist eine Erfassung, keine Abrechnung. Für die Einhaltung der rechtlichen Vorschriften ist die Lohnverrechnung verantwortlich.

Brauchen Mitarbeiter für die Arbeitszeiterfassung ein Fahrzeug?

Nein. Die Erfassung hängt an der Person. Wer kein Fahrzeug hat, bucht Kommen und Gehen im Portal. Auch ein Tracker ist dafür nicht nötig.

Wie werden Pausen in der Arbeitszeiterfassung berücksichtigt?

Mitarbeiter buchen Pausen selbst. Ohne Eintrag zieht fleet365 die bei der Firma hinterlegte Pause ab, sobald die eingestellte Anwesenheit überschritten ist. Der Dienstplan zeigt zusätzlich die Wochensumme abzüglich der gesetzlichen Mindestpausen.

Fragt fleet365 bei einem Krankenstand nach der Krankheit?

Nein. Es wird nie nach Krankheit, Diagnose oder Befund gefragt. Verlangt wird nur die ärztliche Bestätigung der Arbeitsunfähigkeit, ab einer Tageszahl, die die Firma einstellt.

Wer darf Arbeitszeiten nachträglich ändern?

Owner der Firma. Mitarbeiter buchen für heute und stellen für Vergangenes einen Korrekturantrag. Jede Korrektur wird protokolliert.

Was sehen Vorgesetzte und Kollegen bei einer Abwesenheit?

Vorgesetzte sehen die Tage ihres Teams und dass jemand abwesend ist, aber nicht die Art der Abwesenheit.

Sieht ein eingeladener Mitarbeiter die Fahrzeuge der Firma?

Nur wenn die Firma das freigibt. Ein neues Konto hat die Zugangsstufe „nur Arbeitszeit“. Mit hinterlegtem Fahrzeug sieht es zusätzlich die eigenen Fahrzeuge. Die ganze Ortung sehen Owner und Konten, denen die Firma diese Stufe gibt.

Für welche Länder ist die Arbeitszeiterfassung gedacht?

Für Österreich, Deutschland und die Schweiz. Hinterlegt sind Feiertage nach Land und Region und die gesetzlichen Mindestpausen als Voreinstellung. Dies ist eine Erfassung, keine Abrechnung. Für die Einhaltung der rechtlichen Vorschriften ist die Lohnverrechnung verantwortlich.

Kann ich die Arbeitszeiterfassung ausprobieren?

Ja. In der Online-Demo gibt es die Variante „Arbeitszeit ohne Fahrzeug“ mit einer erfundenen Firma, ohne Anmeldung.

Which businesses is this designed for?

For businesses that drive to customers: building services, electrical work, IT support, maintenance, installation, cleaning and similar services. Businesses with standby cover can find specific information under emergency call-out services.

Does every vehicle need a device?

For tracking, yes: a tracker with a SIM card provides location and status information. Depending on the device, it connects to the diagnostic port or is permanently installed. Biricon supplies or arranges the devices.

Can I import existing jobs?

Jobs are received via a JSON-RPC interface or as a CSV file. The external reference is used to identify whether a job already exists.

Where is the data stored?

On Biricon's own server in Austria. Further details can be found in the privacy policy.

How long does implementation take?

That depends on the number of vehicles and whether jobs need to be integrated. We discuss the process in the demo and only provide a firm date once your requirements have been clarified.

Who helps if something is not working?

Biricon IT Services support, by phone and remote support.

Does the system automatically find the best vehicle?

No. It shows nearby vehicles and provides a route suggestion. Your dispatcher decides.

How accurate is the location?

The location is obtained by the tracking device using satellites and transmitted over the mobile network. If reception is poor, the map shows the last known update with its timestamp.

Can I also search historical data?

Yes. The route history search shows where a vehicle was at a particular location.

Kann ich das gefundene Fahrzeug gleich losschicken?

Ja. Am Zielpunkt auf der Karte wählen Sie das Fahrzeug und schicken das Ziel an den Fahrer. Er bekommt es in die App für iPhone und iPad, die derzeit in der Testphase ist. Siehe Fahrzeug hinschicken.

Does the search also work for emergency call-out services?

Yes, the radius search is the same. Further guidance for standby services is available under emergency call-out services.

Is the proof admissible in court?

A log can serve as an indication. Whether it is accepted in an individual case is decided by the competent body. We therefore do not promise any particular evidential value.

How long is the data available?

You agree the retention periods with Biricon. Please raise this with us during set-up.

How accurate is the arrival time?

As accurate as the position and radius of the geofence. A narrow radius captures the arrival early, a wide radius as soon as the vehicle enters the area.

Does the technician have to do anything?

Not for arrival and departure. The vehicle reports its position, and the geofence detects the rest.

Can the customer retrieve the proof themselves?

Via the customer portal, customers see their own vehicles. How this can look for your customers is described under Customer information.

Do technicians need their own phone?

Die Web-App läuft im Browser gängiger Smartphones, auch mit Android. Die App für iPhone und iPad ist derzeit in der Testphase und noch nicht im App Store, die Android-App ist in Entwicklung und derzeit im internen Test. Ob Sie Firmenhandys stellen oder private Geräte zulassen, entscheiden Sie. Bei privaten Geräten empfiehlt sich eine Vereinbarung.

Can the technician switch off tracking?

The driver position is a switch in the app. Tracking of the vehicle runs via the device in the vehicle and is independent of it.

Are customers notified from the app?

No. Dispatch does not send any emails or messages to customers on its own.

What if the phone's battery is flat?

Then feedback and photos are missing, while tracking of the vehicle continues. The app's messages are resent as soon as it has a connection again.

Is there time recording in the app?

Heute nicht. Die Dienstzeit wird aus den Firmenfahrten des Fahrzeugs abgeleitet, eine Stempeluhr ist das nicht. Eine Arbeitszeiterfassung für Mitarbeiter ist im Portal verfügbar: Kommen, Gehen, Pause, Urlaub und Abwesenheit je Person. Das Buchen in der App für iPhone und iPad ist in der Testphase.

Can the customer see the arrival time?

Today only via portal access to their vehicles or through information from you. A dedicated page with the expected arrival is planned.

Does the link stay active permanently?

A link shows a live position via an address with an access code. We discuss how long it remains valid during set-up.

Is the customer informed automatically when the technician sets off?

No. Dispatch does not send anything on its own. You decide whether and when to pass on a link or information.

Can a customer see other people's vehicles?

No. Each user sees only the vehicles that belong to their account.

Does this replace working time recording?

No. It derives times from journeys and provides records. The obligation to keep records remains with the business.

Does this also work without an ignition connection?

Yes. Vehicles without an ignition connection detect journeys from movement. Duty time is derived for them too.

Where do I see the times?

Per vehicle and working day in the duty time report. The history view shows the route as well.

How accurate are the times?

They are approximations from location data. We derive breaks from standing times. During introduction, check the results on a few days against your previous times.

Can the system create invoices?

No. The transfer of job times into an invoice is planned.

Braucht man für das Hinschicken die Disposition?

Nein. Das Hinschicken ist eine Funktion der Karte. Sie brauchen weder Aufträge noch eine Tourenplanung, nur eine Adresse und ein Fahrzeug mit zugeordnetem Fahrer.

Was passiert, wenn dem Fahrzeug kein Fahrer zugeordnet ist?

Dann lässt sich an dieses Fahrzeug nichts senden. In der Fahrzeugliste am Zielpunkt ist es ausgegraut und trägt den Vermerk „Kein Fahrer zugeordnet“. Empfänger ist die eingebuchte Person, sonst der hinterlegte Standardfahrer.

Sieht der Absender, ob das Ziel gelesen wurde?

Ja. Am Zielpunkt auf der Karte steht der Zustand: gesendet, gelesen, unterwegs, angekommen oder abgelehnt.

Kann man ein gesendetes Ziel zurückziehen?

Ja. Am Zielpunkt gibt es dafür den Knopf „Ziel zurückziehen“. Es gilt dann auch beim Fahrer als zurückgezogen.

Funktioniert das Hinschicken auch für Lkw?

Ja. Für Lkw rechnet fleet365 die Strecke mit Höhe, Breite und Gewicht des Fahrzeugs. Findet sich damit kein Weg, wird das gemeldet. Eine Pkw-Strecke als Ersatz gibt es nicht.

Braucht der Fahrer eine Erlaubnis für Mitteilungen?

Für die Mitteilung „Neues Ziel“ ja: Der Fahrer muss in der App angemeldet sein und Mitteilungen am iPhone erlaubt haben. Ohne diese Erlaubnis sieht er das Ziel erst, wenn er die App öffnet.

Kann ich die App für das Hinschicken heute aus dem App Store laden?

Nein. Die App für iPhone und iPad ist in der Testphase und noch nicht im App Store. Die Android-App ist in Entwicklung und derzeit im internen Test.

Führt die App selbst zum Ziel?

Im aktuellen Teststand ja, mit Abbiegehinweisen und Ansage. Für Lkw nutzt sie die Strecke, die fleet365 nach den Maßen des Fahrzeugs rechnet, für Pkw die Streckenberechnung des Telefons. Die Anzeige im Auto über CarPlay ist aktuell im Beta-Test.

Wer darf ein Ziel an ein Fahrzeug senden?

Die Benutzer des Kunden, dem das Fahrzeug gehört, und Benutzer mit einer Freigabe, die das Recht „Navigation senden“ trägt.

Erfährt der Kunde am Zielort etwas davon?

Nein. fleet365 verschickt dabei nichts an Dritte. Das Ziel geht nur an den Fahrer des gewählten Fahrzeugs.

Do I need a developer?

Not for the file route. For ongoing operation via the interface, you need someone to set up your system so that it sends its jobs.

What happens if the same delivery arrives twice?

No second job is created. The existing one is updated, as long as it is not yet under way.

Does any data go to my customers?

No. The system does not send any emails or notifications to customers from dispatch on its own.

Is fleet365 an Odoo module for my instance?

No. fleet365 runs as a system of its own on Odoo 19. Your instance connects to it; it does not load any modules from us.

Does my Odoo also have to be version 19?

For the exchange via the interface or by file, your version plays a lesser role; what matters are the details that your system can supply. We clarify this in the initial conversation.

Is the invoice generated automatically?

That is planned. Today, no invoice is created in your system from fleet365.

Who looks after the connection?

We agree the set-up with you. On your side, you need someone to configure your Odoo so that it sends or outputs jobs.

Does fleet365 support TradeControl?

Not as a ready-made interface. A connection can be established via the general interface or the CSV import , if your system is suitable for it.

Can the time records go back to TradeControl?

No, there is no such return flow today. The transfer of job times to the invoice is planned but not yet available.

Can I start with a file?

Yes. The file route needs no developer and is suitable for a first trial run.

How often do new jobs arrive from Taifun?

At an interval of about 15 minutes. In addition, there is a reconciliation of all open jobs once a day.

What happens to jobs that disappear in Taifun?

fleet365 does not close them on its own. They appear in a list, and the dispatcher decides.

Does Taifun overwrite my address correction?

No. An address corrected by hand is retained in later deliveries.

Do my customers learn anything about the transfer?

No. The system does not send any emails or notifications to customers from dispatch on its own.

Which devices detect journeys?

Devices with an ignition connection detect journeys via the ignition. Devices without this connection detect them via movement.

What happens to private journeys?

The driver classifies a journey as private. The classification is stored traceably. More on this under Data protection in tracking.

Does this also work for vehicles used by several people?

Yes, with driver identification via iButton or app, each journey is assigned to the person driving.

Is a logbook mandatory in Austria?

Not in every case. It serves as proof of private kilometres, for example if you want to apply a reduced benefit in kind. Clarify this with your payroll provider.

What about the mileage allowance?

The mileage allowance applies to business journeys with a private vehicle. fleet365 can document journeys with time and distance. The calculation remains with your payroll provider.

Who receives the evaluation?

Authorised users in your business. They can make it available to your payroll provider or tax adviser.

When is a logbook worthwhile?

That depends on the private share, list price and vehicle costs. Have your tax adviser calculate the comparison.

Can I switch to the flat rate later?

The choice of method is regulated for tax purposes; as a rule it applies for the whole year. Ask your tax adviser.

Do I have to record journeys from home to the customer separately?

fleet365 treats such cases separately. See Journey home rule.

Who classifies journeys as private?

Der Fahrer in der App für iPhone und iPad, auf Rückfrage beim Fahrtantritt; die App ist derzeit in der Testphase. Ohne die App stufen berechtigte Benutzer im Portal ein und können nachträglich ändern. Änderungen werden protokolliert.

What about journeys I have not classified?

Open journeys appear in the journey list and can be completed afterwards.

Does fleet365 calculate the benefit in kind?

No. fleet365 supplies the kilometres. Your payroll provider determines the value.

Who creates the zones?

You, as the customer, in the portal. The type of zone (home or place of business) determines how the journey is treated.

Where do I see the commuting kilometres?

In the private-use evaluation, per month and separate from the other private kilometres.

Does this replace working-time recording?

Nein. Es liefert Anhaltspunkte aus den Fahrten eines Fahrzeugs. Pausen und Arbeit ohne Fahrt sehen Sie darin nicht. Dafür gibt es im Portal die Arbeitszeiterfassung je Person. Auch sie ist eine Erfassung und keine Abrechnung.

Do I need the works council?

Where one exists, introduction usually requires its co-determination. See Informing the works council and employees.

Does this work with vehicles without an ignition connection?

Yes, journeys are then detected via movement. The daily cut-off also protects these vehicles from false day changes.

Do employees have to consent?

That depends on the country, the company and the design. In any case, inform them before the introduction and clarify the legal position.

Can we switch off individual functions?

Yes. Alarms, movement alarm, driver position and phone check are optional functions.

Can my employer see where I go privately?

Journeys classified as private are recorded as private. The driver position is not reported when no business journey is under way.

Do I have to keep the app open all the time?

That depends on which functions your company uses. Your company will explain this to you.

Do I need my own hardware?

Yes, one tracker per vehicle. Biricon supplies or arranges the devices.

Do I need my own SIM card?

The tracker works with a SIM. How it is provided, we clarify in a discussion with you.

What is fleet365?

fleet365 ist eine Ortungs- und Fuhrparklösung der Biricon IT Services GmbH in Brunn am Gebirge. Sie läuft als Webanwendung im Browser. Für Fahrer gibt es eine Web-App im Browser. Die App für iPhone und iPad ist derzeit in der Testphase und noch nicht im App Store, die Android-App ist in Entwicklung und derzeit im internen Test, siehe Apps.

Gibt es bei fleet365 eine Arbeitszeiterfassung?

Ja, im Portal: Kommen, Gehen, Pause, Urlaub und Abwesenheit je Person, auch für Mitarbeiter ohne Fahrzeug. Sie ist eine Erfassung und keine Abrechnung. Siehe Arbeitszeiterfassung.

How do I get started with fleet365?

You request a demo, we discuss your requirements and set everything up together.

Kann ich fleet365 ausprobieren, ohne mich anzumelden?

Ja. Die Online-Demo öffnet für zwei Stunden einen eigenen Demo-Zugang mit erfundenen Fahrzeugen und Strecken.

Does this also work for vehicles without an ignition connection?

Yes. Such vehicles detect journeys via movement. You can find more under Vehicle logbook.

How up to date is the position?

As up to date as the device sends it. For each vehicle the map shows the time of the last message.

Can every employee see all vehicles?

No. Permissions are assigned per user. See Customer portal and permissions.

Does the map run on a smartphone?

Ja, im Browser. Für Fahrer gibt es zusätzlich die Fahrer-Web-App im Browser. Die App für iPhone und iPad ist derzeit in der Testphase, siehe Apps.

What does it mean if a vehicle has not reported for a long time?

Possible causes are a dead spot, a vehicle parked in a hall, or a fault in the device. For this case you can switch on a "Device offline" alarm, see Alerts.

How far back does the history go?

That depends on the agreed retention period. We discuss it with you during setup.

Can I export the route?

Journeys can be evaluated in the logbook. Ask us about the format you want.

Can I search for a place?

Yes. The search in the route history shows when a vehicle was at a particular place.

How many geofences can I create?

We do not specify a fixed limit. What matters more is keeping an overview. We help with the setup.

Can I switch off alarms for a zone?

Yes. Entry and exit can be switched on and off separately for each zone.

Who receives the message?

You define the recipients per zone. If the field is left empty, your default settings apply.

Do I have to switch on all alarms?

No. You switch on alarms as needed. The movement alarm is active only if you switch it on.

Will I get too many false alarms?

The movement alarm has three brakes: a minimum distance against GPS drift, a minimum duration and a lock-out time against repetition.

Where do I see past alarms?

Alarms appear in the vehicle's history along the route and in the alarm list with their status: new, acknowledged or resolved.

Do I need iButtons?

Not necessarily. Logging in to the app is enough for many businesses. The iButton is more convenient when many people drive the same vehicle.

Does the boss see where the driver went privately?

Private journeys are classified as private by the driver. The page Data protection in tracking describes what is then stored.

What happens if the driver forgets the chip?

Then the journey stays assigned to the vehicle. By logging in to the app, the assignment can still be made.

How accurate is the odometer reading?

As accurate as the tracking. Deviations from the speedometer are possible. We recommend a comparison.

Can I correct the odometer reading?

Yes. You compensate for a constant deviation with the speedometer correction, and a growing one with a correction factor.

Can I record fuel purchases?

Yes, by hand with quantity and cost. A fuel-card connection is planned.

Where does the portal run?

Im Browser, auch auf dem Smartphone. Es liegt auf Servern von Biricon in Österreich. Eine App für iPhone und iPad mit Karte und Fahrtenbuch ist derzeit in der Testphase und noch nicht im App Store, siehe Apps.

Can I create users myself?

We discuss this during setup. If required, we do it for you.

Can a customer see only their own vehicles?

Yes. Each keeper or customer sees only their vehicles.

Werden Mitarbeiter den ganzen Tag verfolgt?

Nein. Gespeichert wird nur der letzte Standort, kein Verlauf. In der Pause wird nichts gesendet, und beim Gehen wird alles gelöscht. Außerhalb der Arbeitszeit ist niemand auf der Karte.

Wer sieht den Standort eines Mitarbeiters?

Owner der Firma sehen alle eingestempelten Mitarbeiter ohne Fahrzeug, Vorgesetzte ihr Team. Andere Konten sehen sie nicht.

Kann die Firma die Anzeige der Mitarbeiter auf der Karte abschalten?

Ja, in den Einstellungen der Arbeitszeiterfassung. Dann wird kein Standort angenommen und keiner gezeigt.

Was passiert, wenn ein Mitarbeiter die Ortung am Telefon deaktiviert?

Er kann weiter stempeln. Im Portal und in seiner App steht, dass die Ortung deaktiviert ist, und zu sehen ist nur der Punkt des Arbeitsbeginns.

Kann ich einen Mitarbeiter hinschicken, der gerade nicht arbeitet?

Ja. Er sieht die Anforderung ab der Anmeldung in der App und im Portal. Die Mitteilung aufs Telefon kommt erst beim nächsten Einstempeln.

Braucht der Mitarbeiter dafür eine App?

Für den Standort ja, er kommt aus der App, die in der Testphase ist. Ein gesendetes Ziel sieht der Mitarbeiter auch ohne App im Portal unter „Meine Arbeitszeit“.

Müssen die Mitarbeiter über die Anzeige informiert werden?

Ja. Die Firma muss ihre Mitarbeiter informieren und, wo vorhanden, die Mitbestimmung klären. Das ist Aufgabe der Firma, nicht von fleet365.

Erscheinen auch Fahrer mit Fahrzeug als Person auf der Karte?

Nein. Wer ein Fahrzeug zugeordnet hat, steht über das Fahrzeug auf der Karte. Die Anzeige als Person gilt nur für Mitarbeiter ohne Fahrzeug.

Can fleet365 send the customer the arrival time by link?

A status page for recipients with an estimated arrival is planned and not yet available. A link to just a single vehicle does not exist today; clients can be given a portal login for the vehicles released to them.

Do I need special vehicles for this?

No. Every vehicle with a tracker appears on the map. Whether journeys are detected via the ignition or via movement depends on the device.

Does the system send messages to my customers on its own?

No. No emails or notifications go to your customers from dispatch. What your customers are told is up to you.

Is on-call duty working time?

According to the common interpretation in Austria and Germany, it does not count as long as no work is done. The call-out itself counts. Details depend on the law, the collective agreement and the arrangement. If in doubt, ask your legal adviser.

Can fleet365 replace my working time records?

No. It derives times from journeys and supplies records that you can have checked. The obligation to keep records remains with you.

May I track employees via vehicles?

That depends on the country and on your company. In Austria, a works agreement is often needed where a works council exists. Private use is particularly sensitive. fleet365 offers classification as a private journey for this; checking admissibility is your responsibility.

Does fleet365 automatically show the nearest free vehicle?

It shows the vehicles within a radius of a place with position, ignition and speed. Dispatch judges who is free.

Can I give the proof of attendance to the client?

The history with route, stops and timeline can be retrieved. How you pass it on is up to you. It helps as evidence, but in a dispute a court decides on its evidential value.

What if the vehicle is in a dead spot?

Messages are then missing for a time. The history may have gaps at those points. If a device fails completely, there is an alarm for missing messages.

Can the caller see where my technician is?

A customer status page is planned. Today, dispatch tells the caller the position from the map, or the caller gets portal access to the vehicles released for them. There is no link to just a single vehicle.

How accurate is the arrival at the geofence?

The geofence reacts when the vehicle enters the area. It depends on GPS accuracy and zone size. It cannot tell whether someone is standing at the door behind the vehicle.

Is the technician being monitored all the time?

fleet365 assigns trips to business or private. Private trips can be marked as such. You check the works agreement and the legal basis in your own company.

Can the client follow the position of my vehicle?

Yes, with portal access to the vehicles released for them. There is no link to just one vehicle. An automatic status page is planned.

Do drivers need a smartphone?

Für Aufträge und Rückmeldungen ja, über die Fahrer-Web-App im Browser von iPhone oder Android-Smartphone. Die App für iPhone und iPad ist derzeit in der Testphase und noch nicht im App Store, die Android-App ist in Entwicklung und derzeit im internen Test. Die Ortung selbst läuft über den Tracker im Fahrzeug.

Is this a replacement for my client's control centre?

No. fleet365 supports your own dispatch. Your client's control centre remains independent.

Does fleet365 also detect trips without an ignition connection?

Yes, via motion detection. It is set per vehicle and suits devices without an ignition connection.

Can I hide private trips?

Fahrten lassen sich als Privat einstufen, der Fahrer kann in der App für iPhone und iPad bestätigen, die derzeit in der Testphase ist. Wie viel Detail Sie zu Privatfahrten speichern, besprechen Sie vorher mit Ihrem Betriebsrat oder Ihrer Rechtsberatung.

Does this replace duty scheduling for on-call work?

No. Duty scheduling stays with your HR department. fleet365 complements it with the map, history and working time.

Does fleet365 show what a job cost?

No. It shows times and distances. The costing stays in your order processing.

Can photos of the job be captured?

Mandatory photos exist for damage, complaints and leaving a vehicle in dispatch. A general photo workflow for every job is planned.

Is it worthwhile for small businesses?

That depends on the number of vehicles and the questions you ask yourself. We will gladly show you in a demo.

Does fleet365 detect lift faults?

No. The fault report comes via your channels. fleet365 supports the dispatch of the vehicles afterwards.

Can the operator follow the journey to the site?

A status page is planned. Today you can give a client portal access to the vehicles released for them.

Can fleet365 document on-call duty for technicians?

It documents trips and job locations. How the on-call duty itself is classified depends on the law, the collective agreement and your own arrangement.

Does fleet365 prove that clearing took place?

No. It proves when the vehicle was at the property and for how long. Whether and with what clearing took place is not in it.

Can I create many properties as geofences?

Yes. Each property gets a geofence. How many you can sensibly maintain depends on your effort; technically, the number is not the bottleneck.

Is fleet365 an alarm centre?

No. It is a tool for your dispatch and your records. There is a call-centre view for alarm messages, but it does not replace an approved alarm receiving centre.

Can the client see the patrol trips?

The history can be evaluated and passed on as you decide. A status page for recipients is planned.

Are my employees being followed all the time?

fleet365 tracks the vehicle. Whether and how this is permissible in your company, you clarify with your works council or legal adviser; trips can be classified as private.

Does tracking help against theft?

It increases the chance of finding a vehicle again and shortens the time to reaction. It cannot stop the theft itself.

Does fleet365 replace the alarm system?

No. The alarm system deters, the tracking finds the vehicle again. The two complement each other.

Do I have to switch on alerts myself?

The movement alert is switched off per vehicle until you switch it on. You create geofences and types of alert as needed.

Who sees the positions?

There are users with roles and rights. Each keeper sees only their own vehicles.

What happens if the battery is disconnected?

If the device reports an interruption of the voltage, an alert appears. With a backup battery it can continue to transmit afterwards; without power and battery it cannot.

Should I follow the vehicle myself?

No. Notify the police and give them the coordinates and direction.

Can I also protect trailers and tools?

Yes, with a separate device and a zone. How long it reports without vehicle power depends on the device.

Does this replace the alarm system?

No. A system deters and raises the alarm on site; the tracking finds the vehicle again.

Is this a break-in alarm in the sense of an alarm system?

No. There is no siren and no glass-break sensor. You receive reports on movement, ignition, power, zone and radio loss.

Who receives the alert?

The alert appears in the alert list in the portal. There is no push notification to your phone and no e-mail for it. Who acknowledges it, you decide in your company.

Can I suppress alerts for a workshop?

The movement alert is only active if you switch it on per vehicle, and it never triggers when the ignition is on.

Is the movement alert active automatically?

No. You switch it on per vehicle.

Why does it not trigger on my trip?

With the ignition on there is never a movement alert. For motion-detection vehicles, a movement with the driver's phone at the vehicle is authorised.

How often does the alert come?

After an alert a lockout period applies, so that new reports do not arrive constantly.

What does "Movement, phone not present" mean?

For motion-detection vehicles, the app reports "no" or there is no current report. Then the alert goes out.

Can my dispatcher see where the driver is?

Not through this function. It only reports "yes" or "no". An optional driver position is a separate function with its own switch.

What if the driver has two phones?

One is enough. A phone that is charging at home does not cancel the other's report.

Is it stored when I was at the car?

No. There is one row per device, which is overwritten. No history is created.

Is this a digital key?

No. The phone does not open or lock anything and does not control any access.

Does fleet365 detect a jammer?

We do not promise it. You see that the device no longer reports, and the last position.

Does fleet365 offer remote shutdown?

No.

What does the backup battery bring?

A device with a backup battery can continue to transmit after the power has been disconnected. Whether your device has one depends on the device.

May I track private trips?

Where private use is permitted, private trips should not be used for monitoring. Clarify this in your agreement. fleet365 classifies trips as business and private.

How long are driver points stored?

90 days, adjustable. When reclassified as private, they are deleted immediately.

Do I need a works council or consent?

That depends on the country and the business. Obtain legal advice on this.

Is there a data processing agreement?

Ask us about it. The agreement regulates how we process data on your behalf.

Do I need fleet365 only for large fleets?

No. Even with a few vehicles it is worth a look if phone calls and slips of paper cost time. You can begin with tracking and add dispatch later.

How does the driver receive his jobs?

Via the driver app on the smartphone. He sees his jobs and sends feedback to dispatch.

Does fleet365 replace my haulage software?

No. fleet365 complements dispatch on site. Jobs can be taken over via interface or CSV, and we will discuss further connections with you.

Does the system send messages to my customers?

No. No e-mails or notifications go out to customers from dispatch on their own.

How do my orders get into the system?

Via an interface (JSON-RPC) or as a CSV file. An external reference prevents the same order from being created twice.

Does the system plan automatically?

It makes a suggestion that you review. The decision stays with the dispatcher.

How does fleet365 handle cubic metres and pallets?

The two are kept separate. Volume is never converted into pallet spaces, or the other way round.

Can I also plan by hand?

Yes. The suggestion is optional; you can put together and change routes yourself at any time.

What if a vehicle profile is incomplete?

Then there is no suggestion for that vehicle. You add the data and start the planning again.

Which smartphones is the app available for?

Die Fahrer-Web-App läuft im Browser von iPhone und Android-Geräten. Die App für iPhone und iPad ist derzeit in der Testphase und noch nicht im App Store. Die Android-App ist in Entwicklung und derzeit im internen Test, noch nicht im Play Store. Mitteilungen aufs iPhone gibt es in der App für ein neues Ziel und für die Frage „Privat oder Firma?“, die Web-App schickt keine.

Does the system recognise which driver is driving?

Yes, by iButton at the vehicle and through logging in to the app.

Is the driver tracked all the time?

No. The driver position is reported only if the switch in the app is on and a business trip is under way. When a trip is reclassified as private, the points are deleted.

What happens in a dead spot?

The driver web app needs reception. In a dead spot nothing can be reported until the connection is back.

Can drivers report delays?

Yes, at the press of a button. Dispatch sees the report in the route.

Can the customer sign directly on the smartphone?

Yes. The digital delivery note is signed on the driver's device and can be output as a PDF.

What if the driver does not want to take photos?

In the event of a complaint, the stop cannot be completed without the mandatory photos. Only a dispatcher can waive this, with a reason.

Do I have to take photos for shortages?

No. For a shortage and for a refused delivery, the stop can also be completed without a photo.

Is every action stored?

Scans and completions are logged and not deleted.

Does the digital record hold up in court?

That cannot be said in general terms. It depends on the contract and the individual case. We provide the records; you have their admissibility checked.

Does fleet365 replace the digital tachograph?

No. The tachograph remains mandatory and authoritative. fleet365 supports planning but does not replace the record.

When will remote download of tachograph data be available?

It is planned. We will name a date only once it is fixed.

Can I see a driver's remaining driving time?

The driving times from tracking are available in dispatch. The binding remaining driving time comes from the tachograph; the deadline overview based on it is planned.

Does this also apply to service vehicles without tachographs?

For these there is the Working hours: start, end and duration per working day from business trips.

Can I document waiting times at the customer's premises?

Yes. Arrival and departure are recorded with a timestamp via a geofence. How this can be used contractually depends on the individual case.

How accurate is the measurement?

That depends on the size of the geofence and the tracking quality. Draw the area so that it suits the site.

Do customers receive a notification when the lorry arrives?

No, the system does not send anything to customers on its own. A customer link is planned.

Is there slot management for loading bays?

That is planned. Today you get arrival, departure and waiting time for each stop.

Is every scan stored?

Yes. Every scan is logged and not deleted.

How is the vehicle loaded?

Separately by weight, volume and pallet spaces. The values are never converted into each other.

Can I keep returnable containers per customer?

Yes, as a balance per customer: delivered, taken back, outstanding.

Is this a merchandise management system?

No. fleet365 accompanies load and returnable containers during transport and delivery, but does not replace a warehouse or merchandise management system.

Do I need an additional password for the display?

No. The address contains a long, random identifier and is enough for access. That is why you should treat it like a key.

Can I change anything on the TV?

No. The link is read-only. It gives no access to your account, to reports, to the logbook or to master data.

What happens if many screens use the same link?

The server keeps the response ready for a few seconds so that many screens do not each load the service individually. Several monitors on the same link are therefore no problem.

Does the map also show vehicles on a private trip?

No. Vehicles that are currently on a trip classified as private do not appear on the display.

Does this work on my Apple TV?

Heute über die Spiegelung per AirPlay von einem iPhone, iPad oder Mac, auf dem der Link im Browser geöffnet ist. Eine eigene fleet365-App für Apple TV ist aktuell im Beta-Test und noch nicht im App Store (Stand November 2026). Ob eine Browser-App für Ihr Gerät erhältlich ist, können wir nicht zusichern.

Gibt es die Wandanzeige für Android TV oder Fire TV?

Eine eigene App für Android TV und Fire TV ist in Entwicklung und derzeit im internen Test. Sie ist noch nicht im Play Store bzw. Amazon Appstore (Stand November 2026). Gekoppelt wird sie per Code vom Telefon. Bis dahin nutzen Sie den öffentlichen Link im Browser des Geräts oder an einem Mini-PC.

How long does the screen show anything at night?

That depends on your setting. With the option ‘show only when vehicles are moving’, the map stays off as long as nothing is moving, and the screen shows the time.

Who sets up the link?

You do, in the customer portal, with a few clicks. We will support you in setting up the TV or a mini PC if you wish.

Wann fragt die App „Womit sind Sie unterwegs?“

Wenn ein Mitarbeiter ohne zugeordnetes Fahrzeug ein Ziel öffnet. Wer ein Fahrzeug hat, wird nicht gefragt.

Rechnet fleet365 Verbindungen mit Bus und Bahn?

Nein. Bei der Wahl „Öffis“ übergibt die App Start und Ziel an die Karten-App des Telefons. Die Verbindung sucht dann diese App.

Kann ich statt der Führung in der App meine Karten-App verwenden?

Ja, bei jeder Wahl. Eine Ausnahme sind Fahrzeuge mit hinterlegten Maßen wie Lkw: Dort bleibt es bei der Strecke, die fleet365 nach dem Fahrzeug rechnet.

Bekommt ein Lkw-Fahrer eine Pkw-Strecke, wenn er „Auto“ wählt?

Nein. Bei einem Ziel an ein Fahrzeug gibt es die Frage gar nicht. Die Strecke richtet sich immer nach den Maßen des Fahrzeugs.

Sieht das Büro, womit der Mitarbeiter unterwegs ist?

Ja. Wer das Ziel geschickt hat, sieht die Wahl am Zielpunkt auf der Karte, zusammen mit gelesen, unterwegs und angekommen.

Brauchen Mitarbeiter dafür einen Führerschein oder ein Firmenfahrzeug?

Nein. Genau dafür gibt es die Wahl zu Fuß, Rad und Öffis.

Your question is not here?

Write to us or call. We reply in German.